Redfinn 6M

Specifications

REDFINN 6M STANDARD SPECIFICATIONS:

Please note that the following specifications are subject to change without notice.

  • Stainless Steel Winch-Eye
  • Stainless Steel Stem-Roller with removable pin.
  • Stainless Steel Mooring Post.
  • Two 1" x 14" Stainless Steel Grab Rails on Bow, one each side of mooring post.
  • 4Ft x 2Ft Walk-through Hatch in Bow with Telescopic Struts.
  • Four 6 Stainless Steel Cleats, Two at Transom and Two Midships.
  • Approx. 2.5 Tonnes of Closed Cell PU Rigid Foam Buoyancy, with Upright Flotation.
  • Self Draining Deck via 2" Pipes port & starboard straight out over finnriders.
  • Solid Brass drain plug on keel.
  • Two built in Fuel-Tank holders under Port Transom Seat.
  • Two built in battery holders, under starboard transom seat.
  • 25 Litre Live Bait-Well (Not Rigged Out) in Portside Transom Seat (when rigged as live-bait well, overfow cascades into o/b well for washing).
  • Large Battery storage Box with Cocktail Table Top (can be made lockable on request).
  • 5.5 Cubic Feet dry storage tank under floor.
  • Trunking built into boat & cab for all cables & wiring.
  • Non Swing Back Steering.
  • Cockpit surrounded with 1" Stainless Steel Rails.
  • Stainless Steel Grab Rail, all round cockpit lip of cab
  • Elite Ergonomic Helm Seat with 360 Rotation plus fore and aft slide to accommodate fishing in or out of Cab.
  • Large Stainless Steel Grab Handle / Boarding Step on transom.
  • Stainless Steel Knurled Steering Wheel, complete with S.S Steering Knob.
  • Two fender eyes are fitted near front of cab
  • All windows are 6ml acrylic.use rainex instead of wipers, (glass & wipers =360 option)
  • Free Drogue (sea anchor) supplied for a controlled drift

REDFINN 6M TECHNICAL SPECIFICATIONS:

Please note that the following specifications are approximate and subject to change.

Overall Length:
6 Metres
Overall Beam:
2.2 Metres
Maximum No. of People:
6
C.E. Category:
C
Max Power:
100HP
Boat Height:
TBC
Boat Weight:
500 Kgs
Engine Weight:
118 Kgs

 

YAMAHA F70 TECHNICAL SPECIFICATIONS:

ddssFor optimal performance and fuel efficiency we recommend the Yamaha F70 outboard engine on your new Redfinn 6M. The Yamaha F70 foremost is a unique four-cylinder, single overhead cam, sixteen valve design.

The four-valve-per-cylinder design also allows the powerhead to have 17 percent more intake valve area, which translates to higher volumetric efficiency.

It also employs an anti-knock sensor to optimise ignition timing and a compact single-throttle valve with a long-track induction system for maximum power and thrust.

For alternative power options suited for your Redfinn 6M, please consult with your local dealer.

Please note that the following specifications are as supplied by Yamaha and also subject to change.

Model:
Yamaha F70A
Engine specifications:
4-stroke • 4cyl in line • 16-valve • SOHC
Displacement (cms3):
996
Bore x stroke (mm):
65 x 75
Prop shaft output:
51.5kW (70ps) at 5800rpm
Full throttle rpm range:
5300-6300rpm
Fuel induction system:
Electronic Fuel Injection
Exhaust:
Through propeller hub
Lubrication system:
Wet sump
Oil pan capacity (ltrs):
2.1
Ignition system:
TCI micro-computer
Starting system:
Electric
Alternator output:
12V - 17 Amp with rectifier regulator
Gear shift:
F-N-R
Gear ratio:
28:12
trim & Tilt:
Wide-range power trim and tilt
Dry weight with prop (kg):
118 (estimated)

If you have any questions about the new Redfinn 6M, please contact us here.

Explore the Redfinn 6M: